000 588 11 62 00 Major Assembly Mount - WS01.00-P-0092B
Model all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)
Use in FG 01/03/05/07/08/14/15/22/25/26/27/28/31/32/33/35/41/42/46/47/49/54/55/61/62/72/83/Set B
Purpose:
Universal transmission jack for lifting and for mounting and disassembly of major assemblies or other components.
Reference information
This criteria catalog serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no reference made to manufacturer specific equipment or devices.
NOTE:
Observe for ordering purposes that the standard dimension is 35 mm; this can be achieved if necessary using an adapter.
Use in combination with a suitable attachment (for example: transmission plate).
Minimum requirements:
- Mercedes-Benz standard diameter for mounting hole: 35 mm
- Minimum load carrying capacity for transporter: 1.0 t
- Minimum load carrying capacity for commercial vehicle: 2.0 t