Wiring Diagram For Backup Camera Control Unit - PE54.65-P-2102-97FCA
Model 253 (except 253.99) as of model year 2020 with code 218 (Rear view camera) Control unit N66/2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| A26/17 | Head unit | 12L |
| CAN HMI | User interface CAN | 8K |
| Code 235 | Active Park Assist | 14A |
| Code 501 | 360 degree camera | 14A |
| K40/5 | Rear fuse and relay module | 5L |
| K40/5f417 | Fuse 417 | 4L |
| M35/2 | Rear camera cover motor | 17L |
| N10/8 | Rear SAM control unit | 18A |
| N66/2 | Backup camera control unit | 4A |
| N66/2 | Backup camera control unit | 11A |
| N66/2 | Backup camera control unit | 25A |
| N66/2 | Backup camera control unit | 37A |
| N66/2x1 | Reversing camera control unit electrical connector 1 | 1F |
| N66/2x2 | Reversing camera control unit electrical connector 2 | 10E |
| W6 | Left wheel arch trunk ground point | 4E |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 8L |