LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> GLC300 Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments - 253 Chassis - 2 Of 7 >> Basic Knowledge >> Head-Up Display, Component Description - GF54.30-P-6140RF

Head-Up Display, Component Description - GF54.30-P-6140RF

Model 205, 253 

with code 463 (Head-up display) 

Shown: Model 205.0 

Fig 1: Head-Up Display Component Location - Model 253 With Code 463 (Shown On Model 205.0)
G12938100Courtesy of MERCEDES-BENZ USA

Location 

The Head-up Display is located in a recess in the instrument panel and it is attached to the cockpit cross member.

Tasks 

The head-up display projects driver-relevant information (e.g. speed, navigation information etc.) onto the windshield and into the field of view of the driver. Only information that is redundant to the instrument cluster (A1) is shown.

The Head-up Display is responsible for the following:

Reading in of sensors and signals 

The Head-up Display reads in the input factors over the following connections:

High-speed video link 

The instrument cluster calculates the image information that should be shown in the Head-up Display and transmits this via the HSVL line to the Head-up Display.

User interface CAN 

The signals are read in by the head-up display via the user interface CAN. The functions that use these signals are described in the individual function descriptions (see the appropriate block diagram or function schematic).

Evaluation of input factors 

The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.

Output of signals 

The signals are sent by the Head-up Display over the user interface CAN. The functions that use these signals are described in the individual function descriptions (see the appropriate block diagram or function schematic).

  Wiring diagram for head-up display control unit Model 205 up to model year 2019 with code 463 (Head-up display) Control unit A40/12Model 253 (except 253.99) up to model year 2020 with code 463 (Head-up display) Control unit A40/12 PE54.30-P-2104-97FBA
  Wiring diagram for head-up display Model 253 (except 253.99) as of model year 2020 with code 463 (Head-up display) Model 253.99 as of model year 2019 with code 463 (Head-up display) with code 9O1 (Fuel cell pre-installation) PE54.30-P-2106-97FCA
    Model 205 as of model year 2019 with code 463 (Head-up display) PE54.30-P-2106-97FBA