Check Propeller Shaft Flex Disks For Signs Of Damage And Deformation - AP41.10-P-4152EW
Model 205, 207, 212, 213, 218, 231, 238, 253 (except 253.99), 257, 290
Shown on model 253.925
Shown on model 212
Illustration shows model 213
| Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Preparatory activity | |||
| 1 | Lift vehicle with lifting platform. | ||
| AR00.60-P-1006A | |||
| Check | |||
| 2 | Check flex disks (1) for crack formation, wear, damage and deformation. | If problems occur, ↓ rectify problems. |
|
| 3 | Check propeller shaft flange (2) for crack formation, wear, damage and deformation. | Model 253 (except 253.99) Model 290 with code M005 (4MATIC) If problems occur, ↓ rectify problems. |
|
| Finishing activity | |||
| 4 | Lower vehicle with vehicle lift. | ||
| AR00.60-P-1006A |