Cross Member And Front Reinforcement - BA62.30-P-1000-01H
Model 205, 213, 238, 253, 257, 290, 293
CROSS MEMBER AND FRONT REINFORCEMENT
| Number | Designation | Model 205 | Model 213 | ||||
|---|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 | 28 |
| Right side | Nm | 28 | 35 | ||||
| Stage 2 | ∠° | 135 | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 10 | 8 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 20 | 23 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | 90 | |
| Stage 2 | ∠° | 90 | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 23 | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 3 | 8 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | - | - | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | - | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | - | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | - | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | 23 | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | - | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | - | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | - | 7 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | - | 4 |
CROSS MEMBER AND FRONT REINFORCEMENT
| Number | Designation | Model 238 | Model 253 | ||||
|---|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 | 28 |
| Right side | Nm | 35 | 35 | ||||
| Stage 2 | ∠° | 135 | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 8 | 8 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 23 | 20 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | 90 | |
| Stage 2 | ∠° | 90 | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 23 | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 8 | 3 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | - | 20 | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | 8 | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | 3 | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | 7 | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | - | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | 23 | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | 11 | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | 7 | 8 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | 4 | 8 |
CROSS MEMBER AND FRONT REINFORCEMENT
| Number | Designation | Model 257 | Model 290 | ||||
|---|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 | 28 |
| Right side | Nm | 35 | 35 | ||||
| Stage 2 | ∠° | 135 | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 10 | 10 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | 90 | |
| Stage 2 | ∠° | 90 | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 20 | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 8 | 8 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | - | - | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | - | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | - | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | - | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | - | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | - | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | - | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | - | 8 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | - | 8 |
CROSS MEMBER AND FRONT REINFORCEMENT
| Number | Designation | Model 293 | ||||
|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 |
| Right side | Nm | 35 | ||||
| Stage 2 | ∠° | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 10 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 23 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | |
| Stage 2 | ∠° | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 3 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | 20 | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | 7 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | 5 |