Remove/install Mercedes star - AR88.40-P-4050NKB
MODEL 117, 156, 166, 176, 231, 242, 246
Installation location for radiator grille (2) on MODEL 117
Installation location for radiator grille (2) on MODEL 156, 166, 176, 231, 242 and 246, without CODE 252 (Collision warning system (FCW)), shown on MODEL 246
Installation location for radiator grille (2) on MODEL 166, 176, 242 and 246 up to model year 2015, without CODE 252 (Collision warning system (FCW)), shown on MODEL 246 up to model year 2015
Installation location for front bumper (11) on model 117, 156, 176, 231, 242 and 246, shown on MODEL 246
| Risk of injury due to fan starting unexpectedly | Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes. | AS20.40-Z-0001-01A | |
| Radiator grille installation location (2) | |||
| 1.1 | Remove Mercedes star (1) approx. 15 0 counterclockwise and remove from radiator grille (2) | MODEL 117 | |
| 1.2 | Unclip Mercedes star (1) on catch hook (4) from radiator paneling (2) with long wedge (3) and remove | MODEL 156, 166, 176, 231, 242, 246 | |
| Figure | |||
| 2 | Disconnect electrical connector (7) | MODEL 166, 176, 242 with CODE 252 (Collision warning (FCW)) MODEL 246 up to model year 2015 with CODE 252 (Collision warning (FCW)) |
|
| 3 | Unclip COLLISION PREVENTION ASSIST control unit (A90) from bracket (9) and remove | MODEL 166, 176, 242 with CODE 252 (Collision warning (FCW)) MODEL 246 up to model year 2015 with CODE 252 (Collision warning (FCW)) |
|
| Front bumper installation location (11) | |||
| 4 | Remove front bumper (11) | MODEL 231 | AR88.20-P-2000RK |
| MODEL 117, 176, 242, 246 | AR88.20-P-2000NKB | ||
| 5.1 | Break off retaining pin (12) with suitable tool and remove Mercedes star (10) | MODEL 231, 242, 246 |
|
| 5.2 | Move long wedge (3) between bumper (11) and Mercedes star (10) and unclip Mercedes star (10) | MODEL 117, 156, 176 | |
| Figure | |||
| 6 | Install in the reverse order |