Remove/install mirror glass - AR88.70-P-9020CW

MODEL 203.7## #E with CODE 809 (Model year 2009) 

MODEL 166, 204, 207, 212, 218 

MODEL 164, 251 as of model year 2011 

Shown on model 204 with CODE (249) Automatically dimming inside and outside mirrors including folding outside mirrors 

Fig 1: Identifying Mirror Glass Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of injury  caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens.	Wear protective gloves and safety glasses.	AS60.00-Z-0008-01R
1	Tilt out mirror lens (1) upward
2	Manually pull mirror glass (1) toward rear and unclip from left outside mirror (M21/1) or right outside mirror (M21/2)	When unclipping, ensure that mirror glass (1) and the catch hooks (2) are not damaged. Otherwise it is necessary to replace the mirror glass (1). Installation: Clip mirror glass (1) from bottom upward into left outside mirror (M21/1) or right outside mirror (M21/2). Ensure that all catch hooks (2) arrest completely.
3	Disconnect electrical connectors (3, 4) and remove mirror glass (1)	When installing ensure that electrical wiring harnesses are routed without pinching. Otherwise the electrical wiring harnesses can be damaged. The number of electrical connectors (3, 4) depends on the vehicle equipment.
4	Install in the reverse order