Remove/install glove box - AR68.10-P-1400GQ

MODEL 166 

Fig 1: Identifying Glove Compartment, Side Paneling, Hose, AC Housing

Courtesy of MERCEDES-BENZ USA

Shown on vehicle without code (819) CD changer 

Fig 2: Identifying Glove Compartment, Bolts, Screw - Shown On Vehicle Without Code (819) CD Changer

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove right cover below instrument panel		AR68.10-P-1520GQ
2	Remove hose (3) from AC housing (4)	Pay attention to correct routing of the hose (3).
3	Remove side paneling (2) from instrument panel		Fig 3
4	Remove bolts (5)
5	Open glove compartment (1)
6	Move CD changer to lock position	Vehicles with code (819) CD changer
7	Unscrew bolt (6) at side
8	Unscrew bolt (7) in glove box (1)
9	Lower glove box (1)
10	Disconnect electrical connectors from glove box (1)
11	Remove glove box (1)
12	Install in the reverse order
13	Check CD changer for proper function	Vehicles with code (819) CD changer

Fig 3: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA