Rear axle torsion bar - BA32.20-P-1000-04Q
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 176, 242, 246
MODIFICATION NOTES
| 30.7.13 | Value changed: Bolt, link rod of torsion bar to wheel carrier |
REAR AXLE TORSION BAR
| Number | Designation | MODEL 117 | MODEL 156 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04Q | Nut, link rod to stabilizer bar | Nm | 60 | 60 | |
| BA32.20-P-1002-04Q | Screw/bolt, torsion bar to rear axle carrier | Nm | 35 | 35 | |
| BA32.20-P-1003-04Q | Bolt, link rod of torsion bar to wheel carrier | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 45 | 45 | ||
REAR AXLE TORSION BAR
| Number | Designation | MODEL 242 | MODEL 176, 246 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04Q | Nut, link rod to stabilizer bar | Nm | 60 | 60 | |
| BA32.20-P-1002-04Q | Screw/bolt, torsion bar to rear axle carrier | Nm | 35 | 35 | |
| BA32.20-P-1003-04Q | Bolt, link rod of torsion bar to wheel carrier | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 45 | 45 | ||