Rear axle torsion bar - BA32.20-P-1000-04N
WARNING: This page does not describe the selected car, but rather 203 other vehicles, including the 2020 Mercedes-Benz SLC300, 2020 Mercedes-Benz SL550, 2020 Mercedes-Benz SL450, 2020 Mercedes-Benz S65 AMG, and 2020 Mercedes-Benz GLA250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204, 207, 212, 218
REAR AXLE TORSION BAR
| Number | Designation | MODEL 204 (except 204.077/277/377) | MODEL 204.077/277/377 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04N | Nut, link rod to spring control arm | Stage 1 | Nm | 20 | 35 |
| Stage 2 | ∠° | 180 | - | ||
| BA32.20-P-1002-04N | Nut, link rod to stabilizer bar | Nm | 50 | 50 | |
| BA32.20-P-1003-04N | Screw/bolt, torsion bar to rear axle carrier | Nm | 80 | 70 | |
REAR AXLE TORSION BAR
| Number | Designation | MODEL 207 | MODEL 212 | ||
|---|---|---|---|---|---|
| BA32.20-P-1001-04N | Nut, link rod to spring control arm | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA32.20-P-1002-04N | Nut, link rod to stabilizer bar | Nm | 50 | 50 | |
| BA32.20-P-1003-04N | Screw/bolt, torsion bar to rear axle carrier | Nm | 80 | 80 | |
REAR AXLE TORSION BAR
| Number | Designation | MODEL 218 | ||
|---|---|---|---|---|
| BA32.20-P-1001-04N | Nut, link rod to spring control arm | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 180 | ||
| BA32.20-P-1002-04N | Nut, link rod to stabilizer bar | Nm | 40 | |
| BA32.20-P-1003-04N | Screw/bolt, torsion bar to rear axle carrier | Nm | 80 | |