Remove/install fender liner in rear fender - AR88.10-P-1400GQ

MODEL 166 

Fig 1: Identifying Fender Liner In Rear Fender Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Lift vehicle on vehicle lift		AR00.60-P-1000GZ
2	Unscrew nuts (1)
3	Unscrew bolt (2)
4	Remove expansion rivet (3)
5	Loosen fender liner in rear fender (4) from rear fender	Ensure that fender liner is seated correctly in rear fender (4).
		Long wedge	Figure
6	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA