Removing and installing headlamp for daytime running light - AR82.10-P-2300GW

MODEL 463 as of model year 2013/model refinement package 2012 

Fig 1: Daytime Running Light Headlamp Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Open engine hood		AR88.40-P-1000GG
3	Loosen bolts (1)
4	Unclip headlamp trim (2) upward	Carefully push headlamp trim (2) upward out of both upper guides. Otherwise, there is the risk of breakage.
5	Loosen hose clamp (3)
6	Remove splash water hose (4) from headlamp cleaning system	Carefully remove spray water hose (4). Otherwise the connection pieces on the spray nozzle (5) can break.
7	Disconnect electrical connector (6)
8	Unscrew bolts from left daytime running lamp (E1/3) and right daytime running lamp (E2/3) and remove left daytime running lamp (E13) and right daytime running lamp (E2/3)
9	Install in the reverse order
10	Check headlamp cleaning system for proper function