Remove/install antenna - AR82.70-P-8951GW

MODEL 463 (except 463.202) as of model year 2013/model refinement package 2012 

Fig 1: Antenna Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove overhead control panel control unit	Only place overhead control panel control unit aside. The electrical connectors need not be detached.	AR82.20-P-1000GW
2	Disconnect electrical connection at multifunction antenna (A28/11)
3	Pull protective sleeve (2) from multifunction antenna (A28/11)	Press on protective sleeve (2) using assembly tool.
		Installation tool II	Fig 3
4	Extract the clip (1)
5	Release multifunction antenna (A28/11) with assembly tool and remove from below	Push in multifunction antenna (A28/11) from below until it securely engages in the outer skin of the roof.
		Installation tool I	Fig 2
6	Install in the reverse order

Fig 2: Identifying Installation Tool I (210 589 04 33 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Installation Tool II (210 589 05 33 00)

Courtesy of MERCEDES-BENZ USA