Remove/install turn signal lamps - AR82.10-P-4725GW

MODEL 463 as of model year 2013/model refinement package 2012 

Fig 1: Turn Signal Lamps Remove/Install Components (1 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 2: Turn Signal Lamps Remove/Install Components (2 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 3: Turn Signal Lamps Remove/Install Components (3 Of 3)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove wheel well cover
2	Remove grille (A)
3	Detach turn signal lamp lens (1)
4	Disconnect electrical connectors (2, 3)	Insulate electrical connectors (2, 3) against unintentional contact. Otherwise this can lead to a short circuit.
5	Detach lamp carrier (4) with base (5)
6	Install in the reverse order
7	Perform function test