Remove/install headlight beam adjustment control unit - AR82.10-P-4081GW
MODEL 463 as of model year 2013/model refinement package
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Connect STAR DIAGNOSIS and perform initial startup of headlamp range adjustment control unit (N71) | When replacing headlamp range adjustment control unit (N71) | AD00.00-P-2000-04A |
| 2 | Switch off ignition | ||
| 3 | Remove cover below dashboard | AR68.10-P-1520GW | |
| 4 | Unscrew two nuts from below and detach headlamp range adjustment control unit (N71) from bracket | ||
| 5 | Release and disconnect electrical connector at headlamp range adjustment control unit (N71) | ||
| 6 | Install in the reverse order |