Remove/install center high-mounted stop lamp - AR82.10-P-5375GW

MODEL 463 (except 463.202) as of model year 2013/model refinement package 2012 

Fig 1: Center High-Mounted Stop Lamp Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door trim center piece	Do not tilt door trim center piece (1) when removing. Otherwise there is a risk of breakage of the center mount.
2	Disconnect center high-mounted brake lamp electrical connector (X20/1)	Note routing of electrical line.
3	Disconnect electrical connector (2)	Vehicles with code (EZ8) Parktronic Note routing of electrical line.
4	Remove screw/bolt (1) and detach center brake lamp (E21)
5	Install in the reverse order