Remove fuse and relay box in rear - AR54.15-P-1261GW

MODEL 463 as of model year 2013/facelift 2012 

Fig 1: Anchoring Lug, Retaining Screw And Carpet Cover

Courtesy of MERCEDES-BENZ USA

Fig 2: Rear Fuse And Relay Module With Nut

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Detach ground line from battery		AR54.10-P-0003GW
	Notes on battery		AH54.10-P-0001-01A
2	Remove clamping bolt (2) from anchoring lug (1)
3	Remove carpet cover (3) and place to one side
4	Remove cover of fuse box
5	Unscrew nuts (4) of electrical lines from rear fuse and relay module (F4)
6	Unclip rear fuse and relay module (F4) and carefully pull forward	Clips must latch audibly into place.
7	Detach electrical lines from rear fuse and relay module (F4)	Install new cable ties.
8	Install in the reverse order