000 588 10 62 00 Support Plate - WS26.00-P-3309B
Model all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)
Use in FG 01/08/14/15/22/26/27/28/31/32/33/35/41/42/47/54/83/Set B
Purpose:
Mounting plate for installing and removing major assemblies or other components.
Procurement information:
This criteria catalog is intended as an aid for selecting one of the commercially available variants of a workshop equipment item. It merely describes the minimum requirements for fulfilling the Mercedes-Benz standard. No reference is therefore made to manufacturer-specific equipment or items.
NOTE:
When ordering, please note the standard dimension of 35 mm. This can also be achieved using adapters if necessary. The choice of transmission plate depends on the area of application.
Minimum requirements:
- Mercedes-Benz standard diameter for mounting hole: 35 mm