LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> G550 >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment Check - 463 Chassis >> Testing & Repair >> Remove/Install Wheels >> Remove/Install Wheels - AR40.10-P-1100GWX

Remove/Install Wheels - AR40.10-P-1100GWX

Model 463.234 

up to model year 2019 

with code ZQ0 (G 500 4x4 2  ) 

Model 463.255 

up to model year 2019 

with code MUK2 (USA or Canada vehicle model designation) 

with code ZQ0 (G 500 4x4 2  ) 

Model 463.274 

up to model year 2019 

with code LQ0 (G650 Landaulet) 

Tightening sequence 

Fig 1: Wheels Tightening Sequence - Model 463.255 Up To Model Year 2019 With Code MUK2
G13658006Courtesy of MERCEDES-BENZ USA

Rotate complete wheels 

G13658007Courtesy of MERCEDES-BENZ USA
  Information on tires/rims   AH40.10-P-9411-01A 
REMOVING Remove     
  Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
1 Lift vehicle with vehicle lift.   AR00.60-P-1006A
2 Unfasten wheel bolts and remove wheels using wheel lift dolly.    
INSPECT Check     
3
REFER TO MAINTENANCE
Check tires for damage and condition.   AP40.10-P-4051GM 
INSTALLING Install     
4 Clean and check components of wheel threaded connections, and protect against corrosion.   AR40.10-P-1100-02A 
    NOTES
Before mounting a wheel-and-tire assembly, perform all the following operation steps carefully.
Otherwise, the wheel-and-tire assembly may work its way loose from the vehicle. Paste, hot lubrication 1 kg, DBL 6879.20
*BR00.45-Z-1005-06A 
5 Swap over wheel and tire assemblies on front and rear axle. On vehicles without mixed tires.
NOTES
Note running direction of wheel-and-tire assemblies.
Otherwise, handling characteristics and handling comfort may be impaired and tire wear increased.
 
    IMPORTANT If necessary, swap over wheel and tire assemblies subject to separate repair order.  
6 Mount wheel and tire assemblies using wheel lift dolly, then tighten wheel bolts. IMPORTANT Observe tightening sequence (1 to 8).
TORQUE SPECIFICATION Wheel nut, light alloy wheel
*BA40.10-P-1004-03A 
  Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
7 Lower vehicle.   AR00.60-P-1006A
8
REFER TO MAINTENANCE
Correct tire pressure of tires on front and rear axle.   AP40.15-P-4060G 
DISK WHEELS

Number Designation Model 463 up to model year 2019
BA40.10-P-1004-03A Wheel nut, light alloy wheel Nm 140
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1005-06A Paste, hot lubrication 1 kg, DBL 6879.20 A 000 989 76 51