LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> G550 >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment Check - 463 Chassis >> Testing & Repair >> Remove/Install Wheel And Tire Assemblies - AR40.10-P-1102XG

Remove/Install Wheel And Tire Assemblies - AR40.10-P-1102XG

Model 463 

as of model year 2019 

MODIFICATION NOTES

05.01.2021 Installing differently coated wheel bolts on one wheel and tire assembly (1) is not permissible. Operation step 4.
Fig 1: Wheel And Tire Assembly Components Location - Model 463 As Of Model Year 2019
G13658010Courtesy of MERCEDES-BENZ USA
G13658011Courtesy of MERCEDES-BENZ USA
  Information on tires/rims   AH40.10-P-9411-01A 
  Notes on safety-relevant components   AH00.00-Z-0019-01A
REMOVING Remove     
1 Raise vehicle.   AR00.60-P-1006A
2 Remove wheel trim. If installed.  
3 Remove wheel and tire assemblies (1). IMPORTANTOnly for GERMANY ONLY
Use a wheel lift dolly (2) with a rim size from 17".		  
INSPECT Check     
4 Check the wheel bolt connection components. NOTES
Installing differently coated wheel bolts on one wheel and tire assembly (1) is not permissible. Otherwise braking vibrations will occur.
IMPORTANT Before mounting a wheel and tire assembly (1), remove minor soiling using a rag.
Apply heat-resistant lubricating paste sufficiently on wheel hub. Paste, hot lubrication 1 kg, DBL 6879.20 If problems exist,
↓
clean wheel bolt connection components and protect against corrosion.		 *BR00.45-Z-1005-06A 
      AR40.10-P-1100-02A 
5
REFER TO MAINTENANCE		 Check tires of wheel and tire assemblies (1) for wear and damage. On the wheel and tire assemblies (1) to be installed. AP40.10-P-4051EW 
INSTALLING Install     
6 Mount wheel and tire assemblies (1). IMPORTANTOnly for GERMANY ONLY
Use a wheel lift dolly (2) with a rim size from 17".
IMPORTANT Observe tightening sequence "A, B, C, D, E" and torque specifications of wheel bolts.
TORQUE SPECIFICATION Wheel bolt to steel rim		 *BA40.10-P-1001-01D 
    TORQUE SPECIFICATION Wheel bolt to light alloy rim *BA40.10-P-1002-01D 
7 Mount wheel trim. If installed. NOTES
Check for firm seating of wheel trim on rim and for correct positioning of wheel trim relative to valve.
Otherwise, there is a risk of losing the wheel trim or of damaging the valve.		  
8
REFER TO MAINTENANCE		 Check tire pressure on wheel and tire assemblies (1). Only when changing tire. If there is a problem,
↓
correct tire pressure on wheel and tire assemblies (1).		 AP40.15-P-4061A 
9
REFER TO MAINTENANCE		 Restart tire pressure monitor (TPM) or tire pressure loss warning via the instrument cluster. Only when changing tire. AP40.15-P-4069U 
10 Check maximum speed limitation in instrument cluster, correct if necessary. Only when changing tire.
IMPORTANT Note tire speed rating.
IMPORTANT If the maximum permissible speed of an M+S tire is lower than the maximum permissible speed of the vehicle, attach a corresponding adhesive label in the visual field of the driver.		  
WHEELS

Number Designation Model 463 as of model year 2019
BA40.10-P-1001-01D Wheel bolt to steel rim Nm 150
WHEELS

Number Designation Model 463 as of model year 2019
BA40.10-P-1002-01D Wheel bolt to light alloy rim Nm 150
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1005-06A Paste, hot lubrication 1 kg, DBL 6879.20 A 000 989 76 51
scientia non olet · About LEMON Manuals