Rear Axle Drive - BA35.30-P-1000-02A
Model 460, 461, 463
REAR AXLE DRIVE
| Number | Designation | Model 460 | Model 461 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-02A | Drain screw at rear axle housing | Stage 1 | Nm | 90 | 90 |
| Stage 2 | ∠° | - | - | ||
| BA35.30-P-1002-02A | Oil filler screw at rear axle housing | Nm | 90 | 90 | |
| BA35.30-P-1003-02A | Screw/bolt, end cover to rear axle housing | Stage 1 | Nm | 65 | 65 |
| Stage 2 | ∠° | - | - | ||
| BA35.30-P-1004-02A | Nut, drive flange to drive shaft | Nm | - | 180 | |
| BA35.30-P-1005-02A | Nut, output flange to through-drive shaft | Nm | - | 160 | |
| BA35.30-P-1006-02A | Oil filler screw at portal drive | Nm | - | - | |
| BA35.30-P-1007-02A | Drain screw at portal drive | Nm | - | - | |
| BA35.30-P-1008-02A | Bolt, portal drive to rear axle | Nm | - | - | |
| BA35.30-P-1009-02A | Screw, axle support to rear axle housing/carrier plate | Nm | - | - | |
| BA35.30-P-1010-02A | Bolt, carrier plate for axle support to portal drive | Nm | - | - | |
| BA35.30-P-1011-02A | Screw, shock absorber mount spacer sleeve | Nm | - | - | |
| BA35.30-P-1012-02A | Banjo bolt, ventilation to portal drive | Nm | - | - | |
| BA35.30-P-1013-02A | Bolt, hub to rear axle tube | Stage 1 | Nm | - | - |
| Stage 2 | ∠° | - | - | ||
| BA35.30-P-1014-02A | Bolt, cover to differential | M8 | Nm | - | - |
REAR AXLE DRIVE
| Number | Designation | Model 463 up to model year 2019 | Model 463 as of model year 2019 | ||
|---|---|---|---|---|---|
| BA35.30-P-1001-02A | Drain screw at rear axle housing | Stage 1 | Nm | 90 | 60 |
| Stage 2 | ∠° | - | 90 | ||
| BA35.30-P-1002-02A | Oil filler screw at rear axle housing | Nm | 90 | 90 | |
| BA35.30-P-1003-02A | Screw/bolt, end cover to rear axle housing | Stage 1 | Nm | 65 | 25 |
| Stage 2 | ∠° | - | 60 | ||
| BA35.30-P-1004-02A | Nut, drive flange to drive shaft | Nm | - | - | |
| BA35.30-P-1005-02A | Nut, output flange to through-drive shaft | Nm | - | - | |
| BA35.30-P-1006-02A | Oil filler screw at portal drive | Nm | 60 | - | |
| BA35.30-P-1007-02A | Drain screw at portal drive | Nm | 120 | - | |
| BA35.30-P-1008-02A | Bolt, portal drive to rear axle | Nm | 75 | - | |
| BA35.30-P-1009-02A | Screw, axle support to rear axle housing/carrier plate | Nm | 75 | - | |
| BA35.30-P-1010-02A | Bolt, carrier plate for axle support to portal drive | Nm | 92 | - | |
| BA35.30-P-1011-02A | Screw, shock absorber mount spacer sleeve | Nm | 160 | - | |
| BA35.30-P-1012-02A | Banjo bolt, ventilation to portal drive | Nm | 8 | - | |
| BA35.30-P-1013-02A | Bolt, hub to rear axle tube | Stage 1 | Nm | - | 80 |
| Stage 2 | ∠° | - | 60 | ||
| BA35.30-P-1014-02A | Bolt, cover to differential | M8 | Nm | - | 30 |