Drive Pinion - BA35.30-P-1000-06A
Model 463
as of model year 2019
REAR AXLE/FRONT AXLE DRIVE PINION
| Number | Designation | Model 463 as of model year 2019 | ||||
|---|---|---|---|---|---|---|
| BA35.30-P-1001-06A | Collar nut of drive flange to drive pinion | Basic tightening torque | Nm | 30 | ||
| Increase of basic tightening torque after friction value test by 10 Nm in each case | Stage 1 | increase to | Nm | 40 | ||
| Stage 2 | increase to | Nm | 50 | |||
| Stage 3 | increase to | Nm | 60 | |||
| BA35.30-P-1002-06A | Drive pinion collar nut rotation angle to align the tapered rollers | Adjustment after end play test | Stage 1 | ∠° | 15 | |
| Stage 2 | ∠° | 15 | ||||