Remove/Install Trailing Arm - AR35.20-P-0100F

Model 460

Model 461 (except 461. 304/305/331/333/334/340/343/344/346/392)

Model 463 (except 463.270/271)

up to model year 2013

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Secure vehicle against rolling
2	Detach mounting clamps of hand brake cables at trailing arm (1)
3	Unscrew nut (2) on trailing arm (1) Notes on self-locking nuts and bolts	Tighten the nut (2) with the suspension in the compressed state. Ensure rubber bushing is fitted correctly.	AH00.00-N-0001-01A
		Nut, trailing arm to frame	*BA35.15-P-1001-02A
4	Remove bolts (3) of trailing arm (1) at rear axle Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
		Tighten the bolts (3) or nuts (2) with the suspension in the compressed state.
		Nut/bolt, trailing arm to axle	*BA35.15-P-1002-02A
5	Remove trailing arm (1)
6	Install in the reverse order

TRAILING ARMS, TRANSVERSE CONTROL ARMS

Number	Designation		Model 460	Model 461 Model 463 up to model year 2019
BA35.15-P-1001-02A	Nut, trailing arm to frame	Nm	130	130

TRAILING ARMS, TRANSVERSE CONTROL ARMS

Number	Designation		Model 463 as of model year 2019
BA35.15-P-1001-02A	Nut, trailing arm to frame	Nm	-

TRAILING ARMS, TRANSVERSE CONTROL ARMS

Number	Designation		Model 460	Model 461 Model 463 up to model year 2019
BA35.15-P-1002-02A	Nut/bolt, trailing arm to axle	Nm	210	225

TRAILING ARMS, TRANSVERSE CONTROL ARMS

Number	Designation		Model 463 as of model year 2019
BA35.15-P-1002-02A	Nut/bolt, trailing arm to axle	Nm	-