Carry Out Concentricity Measurement On The Drive Flange - AR35.30-P-4671-02GW

MODEL 463

as of Model Year 2013 /MOPF 2012

Base plate for measuring stand

Inspection data of rear axle final drive

Number	Designation		Model 460, 461, 463
BE35.30-P-1004-01A	Total concentricity deviation of flange	mm	<0, 07

Fig 1: Identifying Measuring Flange (460 589 01 23 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Dial Indicator (001 589 53 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Dial Indicator Holder (363 589 02 21 00)

Courtesy of MERCEDES-BENZ USA

Mount measuring flange to flange (1).
Attach dial indicator holder and dial indicator to transmission housing.
Position dial indicator on front measuring surface of measuring flange.
Turn the flange (1) through one complete rotation and measure the total concentricity.

Courtesy of MERCEDES-BENZ USA