Carry Out Concentricity Measurement On The Drive Flange - AR35.30-P-4671-02A

MODEL 460 

MODEL 461 (except 461.331) 

MODEL 463 (except 463.270/271) 

up to model year 2013 

Base plate for measuring tripod

WF58.50-P-3330-04A

Fig 1: Identifying Measuring Flange (460 589 01 23 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Dial Gauge (001 589 53 21 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Dial Indicator Holder (363 589 02 21 00)

Courtesy of MERCEDES-BENZ USA

1. Attach measuring flange to flange (1).
2. Mount dial indicator holder and Mount dial indicator on transmission housing.
3. Position dial indicator on front measuring surface of measuring flange.
4. Turn the flange (1) through one complete rotation and measure the total concentricity.

   Courtesy of MERCEDES-BENZ USA