Rear Axle Drive - BE35.30-P-1000-01A
Model 460, 461, 463
CHECK VALUES FOR REAR AXLE DRIVE
| Number | Designation | Model 460, 461, 463 | ||
|---|---|---|---|---|
| BE35.30-P-1001-01A | End play of rear axle shaft (new condition) | mm | 0, 15...0, 25 | |
| BE35.30-P-1002-01A | End play of rear axle shaft (after increased mileage) | mm | =≤ 0, 5 | |
| BE35.30-P-1003-01A | Wheel offset of radial shaft sealing ring | mm | 4+0, 3 | |
| BE35.30-P-1004-01A | Total concentricity deviation of flange | mm | ≤ 0, 07 | |
| BE35.30-P-1005-01A | Friction torque of drive pinion bearing | with radial shaft sealing ring | Nm | 2, 5...3 |
| without radial shaft sealing ring | Nm | 1, 65...3, 74 | ||
| BE35.30-P-1006-01A | Preload of differential bearing | mm | 0, 16 | |
| BE35.30-P-1007-01A | Tractive force for determining the friction torque of differential housing bearing (preload) | N | 35...45 | |
| BE35.30-P-1008-01A | Specified basic dimension for rear axle housing | mm | 66 | |
| BE35.30-P-1009-01A | Rear axle differential gear backlash | mm | 0, 10...0, 15 | |