Drive Pinion - BE35.30-P-1000-06A
Model 463
as of model year 2019
CHECK VALUES FOR DRIVE PINION ON REAR AXLE
| Number | Designation | Model 463 as of model year 2019 | |||
|---|---|---|---|---|---|
| BE35.30-P-1001-06A | Friction torque of bevel gear with gaskets | Nm | 3, 2...4, 5 | ||
| BE35.30-P-1002-06A | End play for drive pinion bearing | After tightening the drive flange collar nut | at 30 - 60 Nm | mm | 0 (no play permissible) |
| BE35.30-P-1003-06A | Maximum value, collar nut to drive pinion or coupling flange | Marking, collar nut to drive pinion or coupling flange | Maximum value | ∠° | < 30 |