116 589 08 61 00 Assembly Drift - WS35.00-P-0031C
MODEL 107, 124, 126, 129, 140, 171, 202, 203, 208, 209, 210, 211, 219, 220, 230
MODEL 461, 463 with REAR AXLE 741.1
MODEL 460, 461, 463 with REAR AXLE 741.5
MODEL 461, 463 with REAR AXLE 742.6
MODEL 461 with REAR AXLE 741.6
FG 35/Set C
Purpose:
Installation punch for tapered roller bearing inner race on differential Note:
Ring gear dia.
ø 198, 210 mm.