Check And Adjust Rolling Resistance Of Drive Pinion - AR33.30-P-0458-02GG
Model 460
Model 461 (except 461.331)
Model 463 (except 463.270/271)
/Facelift 2012
CHECK VALUES FOR FRONT AXLE DRIVE PINION
| Number | Designation | Model 460, 461 (except 461.392) Model 463 up to model year 2019 | Model 461.392 | |
|---|---|---|---|---|
| BE33.30-P-1001-02A | Friction torque of bevel gear with gaskets | Nm | 2, 5...3, 0 | 1, 2...1, 7 |
CHECK VALUES FOR FRONT AXLE DRIVE PINION
| Number | Designation | Model 463 as of model year 2019 | |
|---|---|---|---|
| BE33.30-P-1001-02A | Friction torque of bevel gear with gaskets | Nm | 2, 9...4, 4 |
Attach torque meter to flange (9).
- Tighten nut (8) further until the correct friction torque is reached.
Never turn back the nut (8) to adjust the friction torque. If the nut (8) is tightened too firmly, a new compression ring must be installed.