Check Engine Oil Level With Instrument Cluster - AP18.00-P-1812GKI

Engine 176 in model 463 

up to model year 2019 

	Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	Check
1	Switch electronic ignition lock control unit to position "2" (circuit 15R ON).
2	Select the message "Engine oil level measurement running! Measurement only correct if vehicle is level" in the multifunction display using the forward or back buttons on the steering wheel.	Perform engine oil level measurement on an engine at normal operating temperature and wait approx. 5 min for the measurement. If the message "Engine oil level OK" appears in the multifunction display ↓ The engine oil level measurement is complete. If, for example, the message "Refill 1.1 liters of engine oil at filling station" appears ↓ Refill displayed oil filling capacity; note specifications in the multifunction display while doing so. Repeat engine oil level measurement.
			AP18.00-P-0101GE
		If the message "Engine oil level: Reduce oil level" appears in the multifunction display ↓ Drain engine oil and repeat engine oil level measurement.
			AP18.00-P-0101GE
3	Switch electronic ignition lock control unit to position "0".