Electrical Function Schematic For Energy Management, Eco Start/Stop Function - PE54.10-P-2075-97ZGA
Model 463 (except 463.342)
as of model year 2019
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Alternator, signal | 20F |
| 2 | Engine running, signal | 3E |
| 2 | Engine running, signal | 8E |
| 3 | Alternator operating rate, signal | 3F |
| 3 | Alternator operating rate, signal | 8F |
| 3 | Alternator operating rate, signal | 14F |
| 4 | Battery sensor, signal | 3G |
| 5 | Engine start, request | 6F |
| 5 | Engine start, request | 11F |
| 6 | On-board electrical system energy state, signal | 5E |
| 6 | On-board electrical system energy state, signal | 10E |
| 7 | Drivetrain operational, signal | 4F |
| 7 | Drivetrain operational, signal | 9F |
| 8 | Excitation voltage, request | 22F |
| 9 | Specified alternator voltage, signal | 6F |
| 9 | Specified alternator voltage, signal | 10F |
| 9 | Specified alternator voltage, signal | 16F |
| B95 | Battery sensor | 2J |
| CAN B | Interior CAN | 4F |
| CAN C1 | Engine CAN | 15F |
| Flex E | Chassis FlexRay | 9F |
| G2 | Alternator | 23E |
| LIN B15 | Battery sensor LIN | 2H |
| LIN C1 | Drive train LIN | 21F |
| N10/6 | Front SAM control unit | 2E |
| N127 | Drivetrain control unit | 12E |
| N3/10 | ME-SFI [ME] control unit | 18F |
| N3/9 | CDI control unit | 18D |
| N73 | Electronic ignition switch control unit | 7E |
| U74 | Valid for diesel engines | 17D |
| U75 | Valid for gasoline engines | 17F |