Remove/Install Electronic Ignition Lock Control Unit - AR54.21-P-0038XG
Model 463
as of Model year 2019
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Perform commissioning of electronic ignition lock control unit (N73). | ||
| AD00.00-P-2000-04B | |||
| 2 | Remove floor covering at front on driver's side. | AR68.80-P-0007XG | |
| 3 | Disconnect ground line of battery. | AR54.10-P-0003XG | |
| 4 | Disconnect electrical connector (1). | ||
| 5 | Unscrew bolts (2). | ||
| 6 | Remove electronic ignition lock control unit (N73). | ||
| 7 | Install in reverse order. |