Remove/Install 360° Front Camera - AR54.30-P-3001XG

Model 463 

as of Model year 2019 

with code JS1 (360° camera (SURROUND VIEW)) 

Fig 1: 360° Front Camera Components Location - Model 463 As Of Model Year 2019 With Code JS1

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/Install
1	Remove radiator grille (1) far enough until the camera for the 360° camera at the front (B84/9) is accessible.		AR88.00-P-2115XG
2	Disconnect electrical connector (2).
3	Cut cable tie (3).	Install new cable tie(3).
4	Remove the screws (4).
5	Remove holder (5) with camera for 360° camera at front (B84/9).
6	Unclip the camera for the 360° camera at the front (B84/9) from holder (5) (arrows) and remove in direction of arrow (A).	Only when replacing camera for the 360° camera at the front (B84/9).
7	Install in reverse order.
	Calibrate
8	Calibrate the camera for the 360° camera at the front (B84/9).
			AD00.00-P-2000-04B