Programming Of Control Units - AR54.21-P-0014-01Y

Model 117, 118, 129.058/063/067/076, 156, 163, 164, 166, 167, 168, 169, 170, 171.4, 176, 177, 199, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 240, 242, 243, 245 (Except 245.286), 246, 247, 251, 253, 292, 450.3/4, 452.3/4, 454.0, 461 

Programming with CD-DVD 

Model 463 

up to Model Year 2013 

Programming with CD-DVD 

The process descriptions are also updated in XENTRY.

1. Start XENTRY and select the vehicle Model.
2. Select the control unit.
3. Select the menu item "Control unit adjustments".
4. Select the menu item "Control unit programming".
5. Confirm control unit-specific information on control unit programming.
6. Select menu item "Online".
7. Confirm the process.
8. Enter the reason for programming the control unit.
9. Carry out the programming sequence based on the menu specification in XENTRY.
10. Eliminate errors using the test steps in the "Error messages" menu.

    In the event of a communication error between XENTRY and the control unit.

    If the cause of the error cannot be eliminated,

    ↓

    Inform the Star Diagnosis User Help Desk.