Online SCN Coding - AR54.21-P-0013-01X

Model 117, 118, 129.058/063/067/076, 156, 163, 164, 166, 167, 168, 169, 170, 171, 176, 177, 190, 199, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 238, 240, 242, 243, 245, 246, 247, 251, 253, 257, 290, 292, 293, 450, 452, 454, 461, 636, 639, 906 

Model 463 

from Model Year 2019 

Model 463 

up to Model Year 2013 

The following instructions describe the procedure for online SCN coding with XENTRY Flash.

Requirements for online SCN coding are:

• A networked diagnostic system
• A user ID and password for XENTRY Flash (user aftersales platform)

  Entry into coding in XENTRY Diagnostics 

1. Select the control unit.
2. Select the coding in XENTRY Diagnostics.

   The control unit adaptations or installation → SCN Coding → online (networked Star diagnostic device)

3. Enter the user ID and password in the login mask and continue with "Login".

   After logging in, the SCN coding data is automatically queried in the background and the control unit is coding.

4. Print out the order log and enclose it with the repair order.

   The job log can be saved in the diagnostic system via the → "Print menu" → "Print to file". With the Starpad program the job logs are visible and printable via "Star utilities" → "Logs".