(Milling Switch Opening - AR68.20-P-2030-01A)

Model 140 up to 7/31/89 

up to model year 1989 

Model 463 up to 7/31/89 

up to model year 1989 

1. Mount hand-held router (2) on locating and clamping device and carefully press down at handles (6, 13) against surface of clamped cover. Tighten handle (6).

   Hand-held router may not be activated.

   Courtesy of MERCEDES-BENZ USA

2. At depth limiting pin (8), set milling depth 1.6 mm using feeler gauge (18) at black stop screw (19).
3. Lock depth limiting pin (8) with locking screw (9). Release handle (6).

   Courtesy of MERCEDES-BENZ USA

4. Switch on hand-held router, grab at both handles (6, 13) and press down until end stop. Tighten handle (6).

   Courtesy of MERCEDES-BENZ USA

5. Smoothly guide hand-held router (2) clockwise (arrow direction) along template on surface of locating and clamping device (1). Release handle (6).
6. Switch off hand-held router (2).

Courtesy of MERCEDES-BENZ USA