Restart Tire Pressure Monitor (TPM) - AR54.30-P-1001-01XG

Model 463 

as of Model year 2019 

1. Correct tire pressure on wheel and tire assemblies of front and rear axle.
2. Switch on ignition.
3. Call up "Accept current pressure values as guideline value" menu in multifunction display.

   Service → Tire pressure → Accept current pressure values as guideline value.

4. Confirm "Accept current pressure values as guideline value" in menu.

   The note "Tire pressure monitoring system restarted" appears in the instrument cluster. After a few minutes driving, the tire pressure monitoring system is active and tire pressure is monitored.

5. Switch off ignition.