Remove/Install PARKTRONIC System (PTS) Front Parking Assist Sensors (In Front Bumper) - AR54.65-P-0001XG
Model 463
as of Model year 2019
with code EZ8 (PARKTRONIC Park Assist)
Fig 1: Front Parking Assist System (PARKTRONIC) Sensors Components Location - Model 463 As Of Model Year 2019
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1.1 | Remove front wheel arch liner (1). | ||
| For removal of distance sensors (B8/1, B8/6). | AR88.80-P-0005XG | ||
| 1.2 | Remove front bumper (3). | ||
| For removal of distance sensors (B8/2, B8/3, B8/4 or B8/5). | AR88.20-P-2000XG | ||
| 2 | Disconnect electrical connector (2). | ||
| 3 | Unclip distance sensor (B8/1, B8/2, B8/3, B8/4, B8/5 or B8/6) from holder (arrows). | If the seal is damaged. ↓ Install new gasket. |
|
| 4 | Install in reverse order. | ||
| Check | |||
| 5 | Check function of distance sensors (B8/1, B8/2, B8/3, B8/4, B8/5 or B8/6). |