Wiring diagram for rear heated seats control unit - PE91.30-P-2101-97DAA
MODEL 212 with CODE 872 (Heated rear seats) Control unit N25/6
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15L |
| CAN B | Interior CAN | 6K |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f63 | Fuse 63 | 2L |
| N25/6 | Rear seat heaters control unit | 4A |
| N25/6 | Rear seat heaters control unit | 12A |
| R13/5 | Left rear seat sitting surface heated cushion | 9L |
| R13/6 | Left rear backrest heated cushion | 10L |
| R13/7 | Right rear seat sitting surface heated cushion | 12L |
| R13/8 | Right rear backrest heater pad | 14L |
| W19 | Right front seat crossmember ground point | 12E |
| W7/1 | Right taillamp trunk ground point | 8E |
| W7/1 | Right taillamp trunk ground point | 4E |
| W7/1 | Right taillamp trunk ground point | 11E |
| W7/1 | Right taillamp trunk ground point | 15E |
| X30/33 | Right vehicle floor interior CAN voltage distributor electrical connector | 6L |
| X54/11 | Left and right rear seat heater heated cushion electrical connector | 8H |
| X54/11 | Left and right rear seat heater heated cushion electrical connector | 12H |
| X54/23 | Left rear seat heater electrical connector | 10H |
| X54/24 | Right rear seat heater electrical connector | 14H |