Electrical function schematic for on-board diagnosis - PE07.10-P-2720-97DAR
ENGINE 651 as of 3/1/13 in MODEL 212 (except 212.098/298)
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Engine control diagnosis, communication | 9B |
| 1 | Engine control diagnosis, communication | 5B |
| 1 | Engine control diagnosis, communication | 4D |
| 1 | Engine control diagnosis, communication | 4H |
| 2 | Engine diagnosis indicator lamp, actuation | 6H |
| 2 | Engine diagnosis indicator lamp, actuation | 4D |
| 3 | Circuit 87, status | 3H |
| 4 | Combustion engine circuit 87 relay, actuation | 2G |
| 5 | Engine diagnosis indicator lamp, request | 8H |
| A1 | Instrument cluster | 8H |
| A1e58 | Engine diagnosis indicator lamp | 6G |
| CAN D | Diagnostic CAN | 8B |
| CAN E1 | Chassis CAN 1 | 4F |
| CAN E2 | Chassis CAN 2 | 8F |
| Code 494 | USA version | 3K |
| N10/1 | Front SAM control unit with fuse and relay module | 4B |
| N10/1kN | Engine circuit 87 relay | 1H |
| N3/9 | CDI control unit | 4J |
| X11/4 | Diagnostic connector | 10B |