Electrical function schematic for camshaft adjustment - PE07.10-P-2716-97DAI
ENGINES 276 in MODEL 212
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Engine load, signal | 5G |
| 1 | Engine load, signal | 5F |
| 2 | Camshaft Hall sensor, signal | 4H |
| 3 | Coolant temperature sensor, signal | 3G |
| 4 | Camshaft solenoids, actuation | 2F |
| 5 | Engine oil pump valve, actuation | 2D |
| 6 | Engine speed, signal | 4D |
| 7 | Circuit 87, status | 5E |
| B11/4 | Coolant temperature sensor | 2J |
| B2/5 | Hot film mass air flow sensor | 7G |
| B28/7 | Pressure sensor downstream of throttle valve | 6K |
| B6/4 | Left intake camshaft Hall sensor | 3K |
| B6/5 | Right intake camshaft Hall sensor | 3K |
| B6/6 | Left exhaust camshaft Hall sensor | 3K |
| B6/7 | Right exhaust camshaft Hall sensor | 3K |
| B70 | Crankshaft Hall sensor | 4D |
| N10/1 | Front SAM control unit with fuse and relay module | 6A |
| N10/1kN | Engine circuit 87 relay | 6D |
| N3/10 | ME-SFI [ME] control unit | 4E |
| U1020 | Valid for gasoline engine with stratified operation | 6E |
| Y130 | Engine oil pump valve | 2D |
| Y49/4 | Left intake camshaft solenoid | 1G |
| Y49/5 | Right intake camshaft solenoid | 1G |
| Y49/6 | Left exhaust camshaft solenoid | 1G |
| Y49/7 | Right exhaust camshaft solenoid | 1H |