Remove/install alternator - AR15.40-P-5032EL

ENGINE 276 in MODEL 212, 218 

Shown on engine 276.9 

Fig 1: Alternator Remove/Install Components - Shown On Engine 276.9

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Detach ground line from battery		AR54.10-P-0003EW
	Notes on battery		AH54.10-P-0001-01A
2	Remove front engine cover (1)
3.1	Remove air filter housing (2)	ENGINE 276.9
		Bolt, air filter to air intake pipe support brace	*BA09.10-P-1002-01M
		Bolt, air filter to cylinder head cover	*BA09.10-P-1001-01M
3.2	Remove intake air duct on left and right	ENGINE 276.8
4	Remove fan unit	ENGINE 276.8
			AR20.40-P-5050EL
5	Remove charge air duct on the right	ENGINE 276.8
			AR09.41-P-8620ELS
6.1	Remove poly-V belt (6)	ENGINE 276.9
			AR13.20-P-0001EL
6.2	Remove poly-V belt (6) from alternator belt pulley	ENGINE 276.8
			AR13.20-P-0001ELS
7	Detach cap, unscrew nut and remove electrical line (4) from alternator (G2)	Nut, circuit B+ to alternator	*BA15.40-P-1002-01F
8	Remove screw/bolts (5) for alternator (G2)	Bolt, alternator to timing case	*BA15.40-P-1001-01F
9	Set alternator (G2) aside
10	Disconnect electrical connection (3) at alternator (G2)
11	Take alternator (G2) upwards and out
12	Install in the reverse order