Bolt plan for charge air manifold - AR09.41-P-1310-01SXI
ENGINE 642 in MODEL 207, 212, 218, 221
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | ENGINE 642 | |
|---|---|---|---|
| BA09.41-P-1009-01J | Screw/bolt, charge air distribution line to cylinder head | Nm | 18 |
- Firmly install charge air manifold according to bolt plan and tightening torque
.
- Tighten screw/bolt (1) and screw/bolt (11) again using a tightening torque