Remove/install switchover valve for bypass flap aneroid capsule - AR09.40-P-1004CD

ENGINE 651 in MODEL 204, 207, 212 

Fig 1: Switchover Valve For Bypass Flap Aneroid Capsule Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove cylinder head cover trim
2	Remove engine intake air duct upstream of air filter housing
3	Install cover for belt drive	To do this detach cover for upper belt drive to the front and upwards.
4	Detach vacuum hoses (1)
5	Remove electrical connector (2) on charge air bypass flap switchover valve (Y132)
6	Unlock and detach charge air bypass flap switchover valve (Y132) on retaining tab (3)
7	Install in the reverse order