Wiring diagram for backup camera control unit - PE54.65-P-2102-97DAB
MODEL 212 with CODE 218 (Rear view camera) with CODE 498 (Japanese version) Control unit N66/2
| Code: | Designation: | Position: |
|---|---|---|
| A40/3 | COMAND control unit | 9L |
| B84/3 | Backup camera | 5L |
| CAN B | Interior CAN | 12K |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f84 | Fuse 84 | 2L |
| N66/2 | Backup camera control unit | 4A |
| N66/2 | Backup camera control unit | 11A |
| U12 | Valid for left-hand drive vehicles | 11D |
| U13 | Valid for right-hand drive vehicles | 11D |
| U57 | Valid for model 212.2 | 5D |
| U58 | Valid for model 212.0/1 | 3D |
| W6 | Left rear wheel well ground point | 2E |
| X30/32 | Left vehicle floor interior CAN voltage distributor electrical connector | 12L |
| X30/33 | Right vehicle floor interior CAN voltage distributor electrical connector | 12L |
| X8/45 | Left vehicle interior and tailgate electrical connector | 6F |