Wiring diagram for backup camera control unit - PE54.65-P-2102-97DAA
MODEL 212 with CODE 218 (Rear view camera) except CODE 498 (Japanese version) Control unit N66/10
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 15A |
| A40/3 | COMAND control unit | 8L |
| B84/3 | Backup camera | 5L |
| E3 | Left rear lamp unit | 14L |
| E3e3 | Left backup lamp | 15L |
| N10/2 | Rear SAM control unit with fuse and relay module | 2L |
| N10/2 | Rear SAM control unit with fuse and relay module | 12L |
| N10/2f84 | Fuse 84 | 2L |
| N66/10 | Backup camera voltage supply module | 4A |
| N66/10 | Backup camera voltage supply module | 10A |
| U57 | Valid for model 212.2 | 12E |
| U58 | Valid for model 212.0/1 | 11E |
| W6 | Left rear wheel well ground point | 2E |
| X8/45 | Left vehicle interior and tailgate electrical connector | 13F |
| Z38 | Backup lamp connector sleeve | 11G |
| Z38 | Backup lamp connector sleeve | 13G |