Blind Spot Assist wiring diagram - PE54.71-P-2100-97DAB
MODEL 212 as of model year 2014 with CODE 234 (Blind Spot Monitoring) B29/5, B29/6
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 23L |
| B29/4 | Left rear bumper intelligent radar sensor | 11L |
| B29/5 | Right rear bumper intelligent radar sensor | 7L |
| CAN E1 | Chassis CAN 1 | 15K |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f59 | Fuse 59 | 2L |
| W7/8 | Right wheelhouse trunk ground point | 8C |
| X172/2 | Rear bumper radar sensors electrical connector | 5E |
| X30/30 | Vehicle floor chassis CAN voltage distributor electrical connector | 15L |
| Z36/17 | Rear sensor CAN connector sleeve | 11G |
| Z36/19 | Rear sensor CAN connector sleeve | 10H |
| Z36/28 | Rear radar sensors ground line connector sleeve | 8G |
| Z36/29 | Rear radar sensors positive line connector sleeve | 6H |