Wiring diagram of navigation system - PE82.85-P-2005-97DAA
MODEL 212 with CODE 830 (Vehicles for China, additional parts) Control unit N41/1 Model 212 with CODE 835 (Vehicles for South Korea, additional parts) Control unit N41/1
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Color code key | 32L |
| A28/11 | Multifunction antenna | 24L |
| A28/11x1 | Multifunction antenna electrical connector | 24J |
| A40/3 | COMAND control unit | 21L |
| A90/3 | TV digital tuner | 28L |
| B152 | Navigation remote control infrared receiver | 18L |
| H4/27 | Center instrument panel speaker | 16L |
| N10/2 | Rear SAM control unit with fuse and relay module | 3L |
| N10/2f77 | Fuse 77 | 2L |
| N10/2f83 | Fuse 83 | 5L |
| N10/2kB | Circuit 15R relay (1) | 6L |
| N30/4 | Electronic Stability Program control unit | 13L |
| N30/7 | Premium Electronic Stability Program control unit | 10L |
| N41/1 | Navigation processor | 3A |
| N41/1 | Navigation processor | 11A |
| N41/1 | Navigation processor | 19A |
| N41/1 | Navigation processor | 27A |
| U907 | Valid for Night View Assist | 25A |
| U938 | Valid for ESP Basic | 12G |
| U939 | Valid for ESP Premium | 8G |
| W7/8 | Right wheelhouse trunk ground point | 2G |
| X1/55 | External navigation electrical connector | 1E |
| X1/55 | External navigation electrical connector | 18E |
| X1/55 | External navigation electrical connector | 21E |
| X1/55 | External navigation electrical connector | 23E |
| X1/55 | External navigation electrical connector | 26E |
| X1/55 | External navigation electrical connector | 27E |
| X18 | Vehicle interior and harness for taillamp electrical connector | 16H |
| X18/68 | External navigation infrared receiver connector | 18H |
| Z3/12 | Circuit 15R connector sleeve | 5G |
| Z51/6 | Circuit 58d vehicle interior connector sleeve | 7G |
| Z83/11z4 | Screening end connector sleeve | 25H |
| Z83/11z5 | Screening end connector sleeve | 31G |
| Z83/11z6 | Screening end connector sleeve | 31G |
| Z9/6 | Travel distance signal connector sleeve 1 | 10G |