Electrical function schematic for wiper startup suppression - PE82.30-P-2052-97DAA
MODEL 212.0 /2
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 6F |
| 2 | Combination switch, status | 7D |
| 3 | Rain/light sensor, status | 6G |
| 4 | Door rotary tumbler switch, status | 9G |
| 4 | Door rotary tumbler switch, status | 13J |
| 5 | Vehicle speed, signal | 8H |
| 6 | Wiper motor, actuation | 8C |
| 7 | Selector lever position, status | 9D |
| 7 | Selector lever position, status | 15C |
| 8 | Clutch pedal switch, status | 9D |
| 8 | Clutch pedal switch, status | 15E |
| A1 | Instrument cluster | 7K |
| A8/1 | Transmitter key | - |
| A80 | Intelligent servo module for DIRECT SELECT | 21E |
| A85/1s1 | Right front door rotary tumbler switch | 15H |
| A85s1 | Left front door rotary tumbler switch | 15H |
| B38/2 | Rain/light sensor | 5J |
| CAN B | Interior CAN | 7H |
| CAN B | Interior CAN | 5F |
| CAN B | Interior CAN | 9H |
| CAN C | Drive train CAN | 17D |
| CAN E | Chassis CAN | 5D |
| CAN E | Chassis CAN | 10D |
| Code 423 | 5-speed automatic transmission | 20A |
| Code 427 | 7-speed automatic transmission | 20D |
| LIN 2 | Wiper/inside rearview mirror LIN | 5H |
| LIN 2 | Wiper/inside rearview mirror LIN | 7D |
| M6/1 | Wiper motor | 7A |
| N10/1 | Front SAM control unit with fuse and relay module | 7E |
| N15/5 | Electronic selector lever module control unit | 21B |
| N3/10 | ME-SFI [ME] control unit | 13D |
| N3/9 | CDI control unit | 13A |
| N69/1 | Left front door control unit | 11H |
| N69/2 | Right front door control unit | 11H |
| N73 | Electronic ignition switch control unit | 2E |
| N80 | Steering column module control unit | 4B |
| S4 | Combination switch | 2B |
| S40/3 | Clutch pedal switch | 17E |
| U24 | Valid for manual transmission | 17E |
| U74 | Valid for diesel engines | 12A |
| U75 | Valid for gasoline engines | 12D |