Retrofit tablet PC mount control unit - AZ82.80-P-0003-01EW

MODEL 212.0##/2## 1#, 218.3##/9## 1# with CODE 275 (Electrically adjustable front seats memory package) 

The following work procedure is shown on the right side of the vehicle. Installation on the left side of the vehicle is performed correspondingly.

1. Bond felt tape onto Tablet PC mount control unit (2).

   Do not bond the bottom of the Tablet PC mount control unit (2).

   Fig 1: Tablet PC Mount Control Unit

   Courtesy of MERCEDES-BENZ USA
2. Fasten Tablet PC mount control unit (2) to upper cross strut (22) using velcro strip (21).

   The bonding areas must be free of dust and grease. Otherwise adhesion problems may occur.

   Fig 2: Fastening Tablet PC Mount Control Unit To Upper Cross Strut

   Courtesy of MERCEDES-BENZ USA